/asset/d/0/e/e/d0ee8217f9495106328d9aae3accd3537b7f0231_167628_1.jpg)
/asset/d/b/a/7/dba7df94625e815addf577231a44d3869e8b3173_167628_2.jpg)
/asset/8/6/6/4/8664ee62e014df70659683f209f1c3e3229bd233_167628_3.jpg)
/asset/4/6/f/d/46fd08aee58a3708d90b089a4793bd6546c0e4a1_167628_4.jpg)
/asset/d/0/e/e/d0ee8217f9495106328d9aae3accd3537b7f0231_167628_1.jpg)
/asset/d/b/a/7/dba7df94625e815addf577231a44d3869e8b3173_167628_2.jpg)
/asset/8/6/6/4/8664ee62e014df70659683f209f1c3e3229bd233_167628_3.jpg)
/asset/4/6/f/d/46fd08aee58a3708d90b089a4793bd6546c0e4a1_167628_4.jpg)
Please login to see the price
Article-No.:
167628
Manufacturer-No.:
IB-RP111
EAN/GTIN:
4250078169932
Technical specifications
General
Packaged Quantity
1
Product Type
Case
Dimensions & Weight
Width
6,5 cm
Depth
9,5 cm
Height
3,5 cm
Weight
117 g
Dimensions & Weight (Shipping)
Shipping Width
3,5 cm
Shipping Depth
10 cm
Shipping Height
20 cm
Shipping Weight
211 g
Compatibility
Description
Raspberry Pi 4 Model B
Specs
Raspberry Pi 4 Model B
Miscellaneous
Product Material
Aluminum
Color
Black
Description
This Raspberry Pi case is an aluminum case with a small form factor designed for performance and comfort. The case cools down the Raspberry Pi CPU and IC chip thanks to its aluminum construction and included heat sinks with thermal pads. The case is acting as a passive heat sink that improves the single-board computer performances.
- Ready to work
Cut-outs for the Raspberry Pi version 4 (Model B) connections already exist and so the Raspberry Pi can be connected and used immediately after installation. - Space for extra
Raspberry Pi computers are ideally equipped for everyday use, but sometimes you may want to add an extra hardware controller. Thanks to their GPIO interface, most Pi computers support an additional HAT module, but unfortunately not the corresponding cases. For the IB-RP111 this is no problem, because their small space wonder offers room for a HAT module inside the enclosure! - Another brick at the wall
The mounting holes at the bottom of the case allow to mount the Raspberry Pi either by fixing it to a VESA mount using the VESA adapter IB-RPA100, or by fixing it directly to the wall using two screws.
There is no liability or guarantee that all information is complete, correct and up to date at all times.