StarTech.com Dual-Bay USB 3.0 to SATA and IDE Hard Drive Docking Station, USB Hard Drive Dock, External 2.53.5 SATA III and IDE (40 pin) SSDHDD Docking Station, Hot-Swap Hard Drive Bays - Top-Loading - storage controller - ATA / SATA 6Gb/s - USB 3.0

Article-No.:
144989
Manufacturer-No.:
UNIDOCKU33
EAN/GTIN:
0065030859813
WEEE Nummer
DE62095745

Suitable products

Technical specifications

General

Packaged Quantity
1
Product Type
Storage controller

Processor

Manufacturer
JMicron
Processor Number
JMS561U / JMD330

Storage Controller

Form Factor
External
Data Transfer Rate
6 Gbit/s

Expansion Bays

Bays
1 x hot-swap - 2.5" / 3.5" shared, 1 x top accessible - 2.5" / 3.5" shared

Power Device

Type
Power adapter
Nominal Voltage
AC 120/230 V

System Requirements

OS Required
Linux, Apple MacOS X 10.6, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits), Microsoft Windows Server 2008 (32/64-bits), Microsoft Windows Server 2003 (32/64-bits), Google Chrome OS, Apple MacOS X Lion 10.7, Apple OS X 10.8 Mountain Lion, Windows 8 (32/64 bits), Windows 8.1 (32/64 bits), Apple OS X 10.9 Mavericks

Dimensions & Weight

Width
14 cm
Depth
13 cm
Height
7 cm
Weight
610 g

Service & Support

Type
2-year warranty

Compatibility

Description
P/N: SVA12M5NA
Specs
P/N: SVA12M5NA

Miscellaneous

Product Material
Plastic
Color
Black
Features
LED indicator, Tested with up to 1TB 5400 RPM 2.5” hard drives, Tested with up to 6TB 7200 RPM hard drives, UASP transfer protocol
Color Category
Black
Description
Connect both an IDE and a SATA 2.5/3.5in hard drive or solid state drive to your computer system using an available USB 3.0 port, with support for UASP for optimal performance. The UNIDOCKU33 USB 3.0 Universal HDD / SSD Dock enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots, saving you the hassle of mounting the drives into a computer or external enclosure or tray.
Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) and hybrid, drives with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. See our UASP testing results below for further details.
The slot-loading design holds the SATA and IDE drives upright inside the docks, neatly keeping them off the desk, for convenience and a clutter-free setup. For SATA drives, the HDD can be inserted and connected directly through the designated dock slot, while the IDE drive slot is conveniently positioned near the rear panel 40-pin data and LP4 power connections, making it easy to connect to the dock using the included IDE data and power cables.
A single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously - a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa. The dock can also be used to greatly increase  the storage and backup capabilities of your computer system with support for high capacity drives (tested with up to 6TB 3.5" and 2TB 2.5" drives).
The UNIDOCKU33 is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Improved Performance with UASP
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing UASP also shows an 80% reduction in required processor resources.
Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.
Product content

Product content

  • Universal Hard Drive Dock
  • USB 3.0 Cable
  • IDE 40 to 40 Pin Cable
  • LP4 Power Cable
  • 40 Pin + LP4 to 44 Pin IDE Cable
  • Universal Power Adapter (NA/UK/EU/AUS)
  • Instruction Manual
AlertBrowse fileDownload file